Which of the following organizations regulates ultrasound equipment

1.Work-related musculoskeletal disorders (WRMSD) are defined as injuries that involve musculoskeletal symptoms that remain for:

 

a. 7 days or longer

b. 2 weeks or longer

c. 7 weeks or longer

d. 1 month or longer

2. Repeated gripping of the transducer is more com­monly associated with:

a. carpal tunnel syndrome

b. de Quervain’s disease

c. cubital tunnel syndrome

d. thoracic outlet syndrome

3. Which of the following denotes the likelihood cavitation will occur?

a. thermal index

b. radiation force

c. SATA intensity

d. mechanical index

4. Which of the following intensities is greatest across the sound beam?

a. spatial peak

b. temporal peak

c. spatial average

d. temporal average

5. Research has shown transcranial Doppler (TCD) imaging results in:

a. a minimal amount of cavitation

b. tissue lesions in small mammals

c. a rapid increase in the temperature of the cranium

d. a minimal increase in the temperature of the cranium

6. Ultrasound has a small potential to produce a biological effect because:

a. it is a form of energy

b. of the frequency range employed

c. contrast agents introduce bubbles into the tissues

d. fetal tissue is less tolerant to temperature increases

 

7. Which of the following organizations regulates ultrasound equipment?

a. ACR

b. FDA

c. AIUM

d. CAAHEP

8. The AIUM recommends:

a. ultrasound as a safe obstetrical procedure

b. decreased receiver gain and increasing acoustic power

c. prudent use of ultrasound in the clinical environment

d. obstetrical examinations for sex determination of a fetus

9. Cavitation is the result of:

a. a rise in tissue temperature exceeding 1° C

b. the attenuation of the sound wave as it travels through soft tissue

c. pressure changes in soft tissue causing the formation of gas bubbles

d. introduction of bubbles into the tissues and circulation from contrast agents

 

find the cost of your paper

Sketch the load characteristics, terminal voltage/load current, of the following types of DC generator

1. (a) Sketch the load characteristics, terminal voltage/load current, of the following types of DC generator: (i) series-connected, (ii) shunt-connected and (iii) compound-connected.   (b) State one purpose for which….

what happens if the resistance in series with the shunt field of a DC motor is increased in value

1. Sparking at the trailing edges of the brushes in a DC machine is usually prevented by fitting   (a) copper gauze brushes (b) a compensating winding (c) a compound….

Calculate the synchronous speed of a 10-pole three-phase machine connected to a 50 Hz supply.

1. The generator characteristic shown in Figure 9.28 is for a   (a) shunt machine (b) series machine (c) differentially compounded machine (d) cumulatively compounded machine 2.The speed of a….