## What was the correlation between the CES-D scores in the two waves of data collection?

Using output from one of the previous four exercises (B3 through B6), create a table to summarize key results of the analyses. Then write a paragraph summarizing the findings.

Exercise b4

In this exercise, run a stepwise multiple regression to predict depression scores, using the same predictors as in Exercise B3. In the first SPSS Linear Regression dialog box, enter cesd as the Dependent variable and the list of predictors in the Independent slot, as in the previous exercise. For Method, select “Stepwise.” For the Statistics options, you can omit Descriptives and Collinearity Diagnostics because you have already examined these, but this time you should select R squared change. Run the analysis and then answer the following questions: (a) How many predictors were entered before the regression stopped? (b) Which predictor variables made it into the regression—and which did not? Was the order of entry of predictors consistent with the values of the zero-order correlations? (c) Looking at the Model Summary panel, what was the progression of the value of R2 from one step to the next—and were these changes significant? What happens to the standard error of the estimate with each progressive step? (d) Were all models statistically significant—that is, was the value of R2 greater than zero at each step? (e) Looking at the “Excluded Variables” panel—and focusing on Model 4, were any of the remaining predictors statistically significant?

Exercise B3

In this exercise, you will run a simultaneous multiple regression analysis to predict the women’s level of depression (scores on the CESD depression scale, cesd) based on several demographic characteristics, socioeconomic characteristics, health status, and self-reported incidence of abuse in the prior year. The list of predictors is as follows: the two race/ethnicity dummy variables you created in exercise B2; age; educatn (educational attainment); worknow (a dummy variable for currently employed); nabuse (number of different types of abuse experienced in the past year, including verbal abuse, efforts to control, threats of harm, and physical abuse); and poorhlth (a dummy coded variable indicating self-reported poor health at the time of the interview. Bring up the regression dialog box by selecting Analyze ➞ Regression ➞ Linear. Insert the variable cesd in the box labeled Dependent. Insert the 7 predictor variables that we just mentioned into the box for Independent(s). Make sure that Method is set to “Enter,” the command for entering all predictors simultaneously. Click the Statistics pushbutton and then select the following options: Estimates (under “Regression Coefficients”); Model Fit; Descriptives; and Collinearity Diagnostics. Then click Continue, and OK to run the analysis. Answer the following questions: (a) How large is the sample on which the regression analysis was run? (b) Interpret the mean value for poor health self-rating. (c) Which predictor has the highest zero-order correlation with cesd? (d) What were the values of R2 and adjusted R2 ? (e) Which predictors in the analysis were significantly predictive of the women’s depression scores, once other predictors were included? Which were not significantly predictive? (f) For this sample of women, which predictor variable appeared to be the most powerful in predicting depression? (g) Did any of the tolerance levels suggest a problem with multicollinearity?

Exercise B2

Now you can create the new dummy-coded variables. Select Transform ➞ Recode ➞ Into Different Variables. Find racethn in the variable list and move it into the slot for “Numeric Variable Output Variable.” On the right, under Output Variable, type in a name for your first new variable (e.g., black, afamer). In the slot for Label, you can type in a longer label, such as “African American” if you so choose. Then click Change, which will confirm the new variable as the output variable. Next, click the “Old and New Values” button, which will bring up a new dialog box. Under “Old Value,” enter 1, which is the code for African Americans in the original (“old”) variable racethn. Then, on the right under New Value, click “Copy old value,” and then click the Add button. Women who were coded 1 on racethn will also be coded 1 on the new African-American variable. Next, under Old Value, click Range and enter 2 and then “through” 3 (the two codes for Hispanic and White/other women on racethn). On the right under New Value, enter 0, then click Add, which will code all non–African-American women as 0. Finally, under Old Value, click “System- or user-missing,” and then under New Value click “System missing,” then click Add. Women who have missing data for racethn will now have a missing values code for the new variable. Click Continue to go back to the original dialog box, then click OK to run the command. If you look at the last variable in your file in Data View, you should see the new variable with values of .00 and 1.00 (which can be changed to 0 and 1 by going into Variable View and changing the number of decimals to 0). Do the analogous procedure for the next new race/ethnic group— except remember to change the values coded 1 and 0. Now, run frequencies on your new variables, and compare the results to those from Exercise B1, making sure that your new variables accurately reflect the original racial/ethnic distribution.

Exercise B1

For these exercises, you will be using the SPSS dataset Polit2SetC to do multiple regression analyses to predict level of depression in the sample of low-income urban women. You will need to begin by dummy coding the variable race/ethnicity. First, create a frequency distribution for racethn (Analyze ➞ Descriptive Statistics ➞ Frequencies), then answer these questions: (a) What percentage of women in this sample was African American, Hispanic, and White or other? (b) Are there any women whose information for racethn is missing? (c) How many new variables need to be created so that race/ethnicity can be used in regression analyses? (d) Which category do you think should be omitted?

Exercise b6

. It is tempting to think of the results obtained in the previous three analyses as suggesting a causal link between the women’s abuse experiences and their level of depression— that is, inferring that being abused caused higher levels of depression. However, the opposite might be the case. For example, women who are depressed, lethargic, or absorbed with personal problems might incite others to yell at them, threaten them, or hit them. In the next analysis, we explore the issue of direction of influence, though we caution against firm causal conclusions. In this hierarchical regression, we will statistically control the women’s level of depression 2 years earlier and then see if recent abuse experiences affected current depression, with earlier depression held constant. This is analogous to asking whether recent abuse was related to changes in depression. In the first SPSS Linear Regression dialog box, enter cesd as the Dependent variable, and cesdwav1 as the predictor in the Independent slot. Then, click the pushbutton Next in the area labeled “Block.” Now enter nabuse (number of types of abuse) as the predictor in the second block. The Method box should say “Enter.” For statistical options select Estimates for the Regression Coefficients, Model Fit, and R squared change. Then run the analysis and answer these questions based on the output: (a) What was the correlation between the CES-D scores in the two waves of data collection? (b) Was R2 statistically significant at both steps of the analysis? (c) What was the change to R2 when abuse was added to the regression? Was this significant—and, if so, what does this suggest? (d) If you wanted to predict a woman’s current CES-D score based on this analysis, what would the unstandardized regression equation be?

### Complete independent research and review two (2) to three (3) online end-user license agreements.

Complete independent research and review two (2) to three (3) online end-user license agreements. Compare and contrast each EULA with each other. In your response, please consider the following: ·….

### Write a SQL query that identifies the number of prescriptions grouped by drug name.

ALY6030 Final Project Assignment – Pharmacy Claims Due End of Week 6 Background: The excel file “ALY 6030 Final Project Data Set.xlsx” contains sample pharmacy claims for made-up members of….

### Create a JavaFX program to allow a user to query the Northwind database.

Create a JavaFX program to allow a user to query the Northwind database. You should be able to perform the following functionality using the program:   Print order total (not….