The Materials Management Group (MMG) orders parts both for delivery to a customer’s production line and for spares from the Fabrication Department.

SCHOOL OF GRADUATE STUDIES
MBA PROGRAM
OPERATIONAL MANAGEMENT
GROUP ASSIGNMENT
BY: ID

  1. DESTA TADESE GLC/0678/12
  2. BELETE TIRUNEH GLC/0508/12
  3. TAKELE SHIFERA GLC/0504/12
  4. WORKU DEGEFE GLC/0724/12
  5. BEKALU BULA GLC/0505/12
  6. MAREMA USMAN GLC/0683

TO: ADUGNA HUNDE (PhD Candidate)
NOVEMBER, 2020
BEDELE, ETHIOPIA
Case 8: Fabqual Ltd
Fab Qual Ltd. manufactures parts and subassemblies for a number of small-volume manufacturers of specialized construction equipment, including bulldozers, graders, and cement mixers. Fab Qual also manufactures and distributes spare parts. The company has made a specialty of providing spare parts for equipment no longer in production; this includes wear parts that are no longer in production for any OEM.
The Materials Management Group (MMG) orders parts both for delivery to a customer’s production line and for spares from the Fabrication Department. Spares are stocked in a finished goods store. Fab Qual’s part number 650810/ss/R9/o is a wear part made only for

find the cost of your paper

Sketch the load characteristics, terminal voltage/load current, of the following types of DC generator

1. (a) Sketch the load characteristics, terminal voltage/load current, of the following types of DC generator: (i) series-connected, (ii) shunt-connected and (iii) compound-connected.   (b) State one purpose for which….

what happens if the resistance in series with the shunt field of a DC motor is increased in value

1. Sparking at the trailing edges of the brushes in a DC machine is usually prevented by fitting   (a) copper gauze brushes (b) a compensating winding (c) a compound….

Calculate the synchronous speed of a 10-pole three-phase machine connected to a 50 Hz supply.

1. The generator characteristic shown in Figure 9.28 is for a   (a) shunt machine (b) series machine (c) differentially compounded machine (d) cumulatively compounded machine 2.The speed of a….