Research about case management role requirements and responsibilities.

This is an interactive table of contents. If you are viewing this document in Acrobat, clicking on a heading will transfer you to that page. If you have this document open in Word, you will need to hold down the Control key while clicking for this to work.
TABLE OF CONTENTS. 3
INTRODUCTION TO THIS WORKBOOK. 4
What is this workbook about?. 4
Context for Assessment 5
Assessment Requirements. 5
ABOUT THE ASSESSMENTS. 7
Assessment Methods. 7
Resources Required for Assessment 7
INSTRUCTIONS TO STUDENT. 8
KNOWLEDGE ASSESSMENT. 9
PRACTICAL ASSESSMENT. 25
Instructions to Student 25
Task 1 – Nominating a community services organisation. 26
Task 2 – Researching about case management role requirements and responsibilities. 28
Task 3 – Researching about current and emerging industry trends. 31
Task 4 – Creating a personal development plan. 35
Task 5 – Implementing your personal development plan. 40
Task 6 – Undertaking a structured reflection process following implementation of your plan 43
WORKBOOK CHECKLIST. 46
WE WOULD LOVE YOUR FEEDBACK! 48

find the cost of your paper

Sketch the load characteristics, terminal voltage/load current, of the following types of DC generator

1. (a) Sketch the load characteristics, terminal voltage/load current, of the following types of DC generator: (i) series-connected, (ii) shunt-connected and (iii) compound-connected.   (b) State one purpose for which….

what happens if the resistance in series with the shunt field of a DC motor is increased in value

1. Sparking at the trailing edges of the brushes in a DC machine is usually prevented by fitting   (a) copper gauze brushes (b) a compensating winding (c) a compound….

Calculate the synchronous speed of a 10-pole three-phase machine connected to a 50 Hz supply.

1. The generator characteristic shown in Figure 9.28 is for a   (a) shunt machine (b) series machine (c) differentially compounded machine (d) cumulatively compounded machine 2.The speed of a….