Recycling in the Middle East, the GCC, the UAE

LSC 2533 Research Methods – Research Concepts 3

Background Research Report (10%)

Due Date:  March 27th

Components

Complete a written report of 500 to 1000 words on the topic you have chosen to do your research assignment on. Work that is not your own writing will receive.

 

Including the following:  my topic about Recycling

  • Introduction ( Recycling )
    • This includes a summary of what you discuss in the paper
    • State why you think this topic is important
  • General background
    • Provide general background information on the topic
    • Provide information on the topic specific to this region (the Middle East, the GCC, the UAE)
      • Include some statistics
      • Discuss issues and problems related to the topic
    • Comments
      • Discuss what information you would like to know in terms of the UAE
      • Describe how your own research at the college may help to answer these questions. ( I send the question in the attachment )
    • References
      • Include at least 3 APA referenced sources.
      • Statistical information must be cited.

What We Offer:
• On-time delivery guarantee
• PhD-level professionals
• Automatic plagiarism check
• 100% money-back guarantee
• 100% Privacy and Confidentiality
• High Quality custom-written papers

find the cost of your paper

design suitable bearings to support the load for at least 5E8 cycles at 1 200 rpm using deepgroove ball bearings.

The shaft shown in Figure P11-4 was designed in Problem 10-19. For the data in row (a) of Table P11-1, and the corresponding diameter of shaft found in Problem 10-19,….

Find the minimum film thickness for a long bearing with the following data: 30-mm dia, 130 mm long, 0.0015 clearance ratio, 1 500 rpm, ISO VG 100 oil at 200°F, and supporting a load of 7 kN.

1.       A paper machine processes rolls of paper having a density of 984 kg/m3. The paper roll is 1.50-m OD X 22-cm ID X 3.23-m long and is on a simply supported, 22-cm OD, steel….

Find the minimum film thickness for a bearing with these data: 30-mm dia, 25 mm long, 0.0015 clearance ratio, 1 500 rpm, ON = 30, ISO VG 220 oil at 200°F.

1.       Problem 7-12 estimated the volume of adhesive wear to expect from a steel shaft of 40 mm dia rotating at 250 rpm for 10 years in a plain bronze….