In deep drawing of a cylindrical cup, is it always necessary that there to be tensile circumferential stresses on the element in the cup wall, a shown in Fig. 7.50b? Explain.

In deep drawing of a cylindrical cup, is it always necessary that there to be tensile circumferential stresses on the element in the cup wall, a shown in Fig. 7.50b? Explain.

 

The reason why there may be tensile hoop stresses in the already formed cup in Fig. 7.50b

on p. 388 is due to the fact that the cup can be tight on the punch during drawing. That is why

they often have to be stripped from the punch with a stripper ring, as shown in Fig. 7.49a on

p. 387. There are situations, however, whereby, depending on material and process parameters,

the cup is sufficiently loose on the punch so that there are no tensile hoop stresses developed.

 

find the cost of your paper

Explain why attenuation is not a big problem in PET.

Consider a 2-D object consisting of two triangle compartments, as shown in Figure P9.4. Suppose a solution containing a 511 KeV gamma ray emitting radionuclide with concentration f = 0.5….

Give the mean and the variance of the reconstructed image, mean[ˆ f(x, y)] and var[ˆ f(x, y)].

Ignoring the inverse square law and attenuation, an approximate reconstruction for SPECT imaging is given by where c˜() =  {||W()} and W() is a rectangular windowing filter that cuts off at = 0…..

Find the numerical responses in each to an event in crystal C(4, 6).

Suppose a PET detector comprises four square PMTs (arranged as a 2 by 2 matrix) and a single BGO crystal with slits made in such a way that it is….