How can LAX be a better neighbour to the surrounding communities?

Airport Design Competition

General Information

 

  1. Design Challenge Area: Airport Environmental Interactions

 

  1. Specific Challenge Selected: How can LAX be a better neighbour to the surrounding communities?

 

  • Creative Solutions to Environmental Impacts:

 

  1. Aircraft Noise Mitigation (Reducing Noise Exposure)
    1. Curfew for “type” aircraft

 

*You MUST include in your section:

  1. Literature Review = Summary of Literature. This is an overview of what was gleaned from the literature review with a discussion of primary sources and their influence on the design. Specific reference citations are to be provided in Appendix F.
  2. Alternative Design(s) = Team’s Problem Solving Approach to the Design Challenge. This section should include a thorough description of individual’s or team’s work including a description of both interdisciplinary and systems engineering approaches as appropriate to solving the problem.
  3. Technical Aspects = Description of how the technical aspects of the Design Challenge are addressed through drawings, mockups, computer codes, etc. as appropriate to provide evidence of a thorough design process.
  4. Safety Risk Assessment = The FAA promotes a culture of safety throughout all its operations. Examine existing FAA safety management system guidance as it relates to your proposed design solution. Consider inherent risks and describe how these risks should be addressed to ensure safe operations. *Be sure to reference Introduction to Safety Management Systems for Airport Operators (FAA Advisory Circular 150/5200-37) and FAA Safety Management System Manual available under the Resources section of the Competition website.
  5. Industry Interaction = Description of interactions with airport operators and industry experts in the design process. Be explicit. Identify contacts and interactions. This is a required Competition component.
  6. Projected Impacts = Description of the projected impacts of the team’s design and findings with a thorough discussion of how the design/solution meets FAA goals. This section should address commercial potential for the design, including a description of processes that would need to be undertaken to bring the design to the product/ implementation state. Emphasis should be on increased affordability and utility. The section should provide a financial analysis that reflects a realistic approach to projected cost/benefit determination and for the team’s design. Guidelines for acceptable

 

*Additional Information:

  • Format: double-spaced, single-sided, 12-point Times New Roman font. 10-point font for captions/charts.

 

What We Offer:
• On-time delivery guarantee
• PhD-level professionals
• Automatic plagiarism check
• 100% money-back guarantee
• 100% Privacy and Confidentiality
• High Quality custom-written papers

find the cost of your paper

Calculate the maximum achievable bridge out-of-balance voltage for an applied torque T of 103 N m given the following

Four strain gauges, with specification given below, are available to measure the torque on a cylindrical shaft 4 cm in diameter connecting a motor and load. (a) Draw clearly labelled….

Find the gain and phase characteristics of the maintaining amplifier.

A solid-state capacitive humidity sensor has a capacitance given by: C = 1.7 RH + 365pF where RH is the percentage relative humidity. The sensor has an associated parallel resistance….

calculate the mean velocity of the gas at maximum flow rate

A pitot tube is used to measure the mean velocity of high pressure gas in a 0.15 m diameter pipe. At maximum flow rate the mean pitot differential pressure is….