estimate the probable number of errors if 1600 bits of information are transmitted.

Ten measurement signals are input to a multiplexer so that each one is sampled twice per second. The multiplexed signal is input to a serial digital transmitter incorporating a 10-bit ADC. The resulting PCM signal is converted into FSK such that 720 Hz corresponds to a 1 and 480 Hz corresponds to a 0. Estimate the bandwidth required by the FSK signal.

(a) Random noise is characterised by a Gaussian probability density function of standard deviation  V and mean value  Using the probability values given below, calculate the probability that the noise voltage:

(i) exceeds +0.5 V

(ii) lies between −1.0 and +1.0 V

(iii) is less than −1.5 V.

(b) Information in binary form is sent with a 0 represented by 0 V and a 1 represented by 5 V. During transmission the above random noise is added to it. The receiver decides that a 0 has been transmitted if the total input voltage is less than 2.5 V and that a 1 has been transmitted if the total input voltage is greater than 2.5 V. Use the probability values below to estimate the probable number of errors if 1600 bits of information are transmitted.

(a) Random noise is characterised by a Gaussian probability density function of standard deviation σ = 1.0 V and mean value R = 0 V. Using the probability values given below, calculate the probability that the noise voltage:

(i) exceeds +0.5 V

(ii) lies between −1.0 and +1.0 V

(iii) is less than −1.5 V.

(b) Information in binary form is sent with a 0 represented by 0 V and a 1 represented by 5 V. During transmission the above random noise is added to it. The receiver decides that a 0 has been transmitted if the total input voltage is less than 2.5 V and that a 1 has been transmitted if the total input voltage is greater than 2.5 V. Use the probability values below to estimate the probable number of errors if 1600 bits of information are transmitted.

Calculate p(0) such that p(y) is normalised.

A PCM transmitter sends out a 12-bit serial digital signal with 5 V corresponding to a 1 and 0 V corresponding to a 0. The signal passes over a transmission….

Calculate the cost per equivalent unit of material and conversion cost for January

Calculate the cost per equivalent unit of material and conversion cost for January – using the Weighted Average Approach Units Materials Conversion Work in process January 1 2,500 50% 35%….

use this to simplify complex fractions.

For some practice working with complex numbers: Calculate (3-4i)+(2+5i) = , (3-4i)-(2+5i) = , (3-4i)(2+5i) = . The complex conjugate of (1+i) is (1-i). In general to obtain the complex….