Draw indicator diagram for the following cases of a reciprocating pump

1.Draw an indicator diagram of a single-acting reciprocating pump considering

 

acceleration and friction. What would be the change in the indictor diagram if an

air vessel is attached (a) to suction side only, (b) to the delivery side only, and (c)

to both the suction and delivery sides.

2. Draw indicator diagram for the following cases of a reciprocating pump:

(a) When no air vessel is installed

(b) When air vessel is installed on suction side close to the pump

(c) When air vessel is installed on delivery side close to the pump

(d) When air vessels are installed on both sides of the pump and both are close to

the pump.

find the cost of your paper

Explain why attenuation is not a big problem in PET.

Consider a 2-D object consisting of two triangle compartments, as shown in Figure P9.4. Suppose a solution containing a 511 KeV gamma ray emitting radionuclide with concentration f = 0.5….

Give the mean and the variance of the reconstructed image, mean[ˆ f(x, y)] and var[ˆ f(x, y)].

Ignoring the inverse square law and attenuation, an approximate reconstruction for SPECT imaging is given by where c˜() =  {||W()} and W() is a rectangular windowing filter that cuts off at = 0…..

Find the numerical responses in each to an event in crystal C(4, 6).

Suppose a PET detector comprises four square PMTs (arranged as a 2 by 2 matrix) and a single BGO crystal with slits made in such a way that it is….