Discuss the various steps in the capital equipment acquisition process.

AMD Construction and Negotiation

Read Case 3: AMD Construction in the text (pg. 448-450) and answer the following questions in a four page, APA formatted paper:

  1. Discuss the various steps in the capital equipment acquisition process.
  2. Develop a comprehensive analysis of the negotiations between Jane Axle and Tom Reed. (Provide a chart to show financial impacts.)
  3. What is your assessment of the negotiations process, given what you have studied?  What are your recommendations for Mr. Reed?  You must justify your conclusions.

Suggestion of format for analysis:

  Current Machine CAT-1 machine-purchase CAT-1 machine – Lease
Operating cost

(without operators)

     
Direct Labor      
Depreciation

(straight line) 4 months

     
Lease Expense 4 Months      
Interest expense

at 8% for 4 months

     
Salvage Value after 3 years      
Unexpected Costs      
Totals      

 

find the cost of your paper

Sketch the load characteristics, terminal voltage/load current, of the following types of DC generator

1. (a) Sketch the load characteristics, terminal voltage/load current, of the following types of DC generator: (i) series-connected, (ii) shunt-connected and (iii) compound-connected.   (b) State one purpose for which….

what happens if the resistance in series with the shunt field of a DC motor is increased in value

1. Sparking at the trailing edges of the brushes in a DC machine is usually prevented by fitting   (a) copper gauze brushes (b) a compensating winding (c) a compound….

Calculate the synchronous speed of a 10-pole three-phase machine connected to a 50 Hz supply.

1. The generator characteristic shown in Figure 9.28 is for a   (a) shunt machine (b) series machine (c) differentially compounded machine (d) cumulatively compounded machine 2.The speed of a….