Determine the force transmitted to the support when the system runs at the rotating speed ω = 1.5

 

Consider the single-degree-of-freedom system shown in Figure 9.8. The excitation force due to the rotating unbalance is meω2sin(ωt). Assume that the system has the following parameters: = 5 kg, = 100 kg, = 0.1 m, = 5,000 N/m, and = 200 N・s/m.

a. Determine the force transmitted to the support when the system runs at the rotating speed ω = 1.5ωn.

b. Determine the force transmissibility.

c. The spring is replaced to decrease the force transmissibility at the same excitation

frequency to 20%. Determine the stiffness of the new spring.

find the cost of your paper

erive the differential equations in terms of the liquid heights h1 and h2.

  Figure 7.18 shows a liquid-level system in which two tanks have cross-sectional areas A1 and A2, respectively. The volume flow rate into tank 1 is qi. A pump is connected to the bottom….

Derive the differential equation relating the liquid height h and the volume flow rate qi at the inlet.

  Consider the single-tank liquid-level system shown in Figure 7.19, where the volume flow rate into the tank through a pipe is qi. The liquid leaves the tank through an orifice….

Derive the differential equations in terms of the liquid heights h1 and h2.

Figure 7.20 shows a hydraulic system of two interconnected tanks that have the same cross-sectional area of A. A pump is connected to tank 1. Assume that the relationship between the….