Design a vibration absorber assuming that the maximum allowable displacement of the absorber is 5 cm.

 

A rotating machine has a mass of 6 kg and a natural frequency of 5 Hz. Due to a rotating unbalanced mass, the machine is subjected to a harmonic disturbance force meω2sin(ωt). When the machine operates at a frequency of 3.5 Hz, the amplitude of the disturbance force

is 40 N.

a. Design a vibration absorber assuming that the maximum allowable displacement of the absorber is 5 cm.

b. Using MATLABR, write an m-file to plot X1/me versus ω. Use the decibel units to show the vertical axis.

find the cost of your paper

erive the differential equations in terms of the liquid heights h1 and h2.

  Figure 7.18 shows a liquid-level system in which two tanks have cross-sectional areas A1 and A2, respectively. The volume flow rate into tank 1 is qi. A pump is connected to the bottom….

Derive the differential equation relating the liquid height h and the volume flow rate qi at the inlet.

  Consider the single-tank liquid-level system shown in Figure 7.19, where the volume flow rate into the tank through a pipe is qi. The liquid leaves the tank through an orifice….

Derive the differential equations in terms of the liquid heights h1 and h2.

Figure 7.20 shows a hydraulic system of two interconnected tanks that have the same cross-sectional area of A. A pump is connected to tank 1. Assume that the relationship between the….