Comment on how these methods could improve drawability.

It has been suggested that deep drawability can be increased by (a) heating the flange and/or (b) chilling the punch by some suitable means. Comment on how these methods could improve drawability. Refering to Fig. 7.50, we note that:


(a) heating the flange will lower the strength of the flange and it will take less energy

to deform element A in the figure, thus it will require less punch force. This will reduce

the tendency for cup failure and thus improve deep drawability. (b) chilling the punch will increase the strength of the cup wall, hence the tendency for cup failure by the longitudinal tensile stress on element B will be less, and

deep drawability will be improved.

find the cost of your paper

Explain why attenuation is not a big problem in PET.

Consider a 2-D object consisting of two triangle compartments, as shown in Figure P9.4. Suppose a solution containing a 511 KeV gamma ray emitting radionuclide with concentration f = 0.5….

Give the mean and the variance of the reconstructed image, mean[ˆ f(x, y)] and var[ˆ f(x, y)].

Ignoring the inverse square law and attenuation, an approximate reconstruction for SPECT imaging is given by where c˜() =  {||W()} and W() is a rectangular windowing filter that cuts off at = 0…..

Find the numerical responses in each to an event in crystal C(4, 6).

Suppose a PET detector comprises four square PMTs (arranged as a 2 by 2 matrix) and a single BGO crystal with slits made in such a way that it is….