Aircraft Noise Mitigation

Airport Design Competition

General Information


  1. Design Challenge Area: Airport Environmental Interactions


  1. Specific Challenge Selected: How can LAX be a better neighbour to the surrounding communities?


  • Creative Solutions to Environmental Impacts:


  1. Aircraft Noise Mitigation (Reducing Noise Exposure)
    1. Curfew for “type” aircraft


*You MUST include in your section:

  1. Literature Review = Summary of Literature. This is an overview of what was gleaned from the literature review with a discussion of primary sources and their influence on the design. Specific reference citations are to be provided in Appendix F.
  2. Alternative Design(s) = Team’s Problem Solving Approach to the Design Challenge. This section should include a thorough description of individual’s or team’s work including a description of both interdisciplinary and systems engineering approaches as appropriate to solving the problem.
  3. Technical Aspects = Description of how the technical aspects of the Design Challenge are addressed through drawings, mockups, computer codes, etc. as appropriate to provide evidence of a thorough design process.
  4. Safety Risk Assessment = The FAA promotes a culture of safety throughout all its operations. Examine existing FAA safety management system guidance as it relates to your proposed design solution. Consider inherent risks and describe how these risks should be addressed to ensure safe operations. *Be sure to reference Introduction to Safety Management Systems for Airport Operators (FAA Advisory Circular 150/5200-37) and FAA Safety Management System Manual available under the Resources section of the Competition website.
  5. Industry Interaction = Description of interactions with airport operators and industry experts in the design process. Be explicit. Identify contacts and interactions. This is a required Competition component.
  6. Projected Impacts = Description of the projected impacts of the team’s design and findings with a thorough discussion of how the design/solution meets FAA goals. This section should address commercial potential for the design, including a description of processes that would need to be undertaken to bring the design to the product/ implementation state. Emphasis should be on increased affordability and utility. The section should provide a financial analysis that reflects a realistic approach to projected cost/benefit determination and for the team’s design. Guidelines for acceptable


*Additional Information:

  • Format: double-spaced, single-sided, 12-point Times New Roman font. 10-point font for captions/charts.


What We Offer:
• On-time delivery guarantee
• PhD-level professionals
• Automatic plagiarism check
• 100% money-back guarantee
• 100% Privacy and Confidentiality
• High Quality custom-written papers

find the cost of your paper

design suitable bearings to support the load for at least 5E8 cycles at 1 200 rpm using deepgroove ball bearings.

The shaft shown in Figure P11-4 was designed in Problem 10-19. For the data in row (a) of Table P11-1, and the corresponding diameter of shaft found in Problem 10-19,….

Find the minimum film thickness for a long bearing with the following data: 30-mm dia, 130 mm long, 0.0015 clearance ratio, 1 500 rpm, ISO VG 100 oil at 200°F, and supporting a load of 7 kN.

1.       A paper machine processes rolls of paper having a density of 984 kg/m3. The paper roll is 1.50-m OD X 22-cm ID X 3.23-m long and is on a simply supported, 22-cm OD, steel….

Find the minimum film thickness for a bearing with these data: 30-mm dia, 25 mm long, 0.0015 clearance ratio, 1 500 rpm, ON = 30, ISO VG 220 oil at 200°F.

1.       Problem 7-12 estimated the volume of adhesive wear to expect from a steel shaft of 40 mm dia rotating at 250 rpm for 10 years in a plain bronze….