A centrifugal pump is installed at a height of 5.0 m above the sump water level.

1.A centrifugal pump is installed at a height of 5.0 m above the sump water level. Frictional losses in the suction side of the pump amount to 0.6 m. The atmospheric pressure is 10.3 m of water and the vapor pressure is 0.4 m (abs). The NPSHA of the pump is

 

(a) 3.7 m (b) 4.0 m (c) 4.3 m (d) 4.6 m

2. A centrifugal pump running at 500 rpm and at its maximum efficiency is delivering a head of 30 m and a flow rate of 60 liters/minute. If the rpm of tahe pump is changed to 1000 rpm then the head H in metres and the flow Q in litres/minute can be estimated to be

(a) (60, 120) (b) (120, 120) (c) (60, 480) (d) (120, 30)

 

find the cost of your paper

Explain why attenuation is not a big problem in PET.

Consider a 2-D object consisting of two triangle compartments, as shown in Figure P9.4. Suppose a solution containing a 511 KeV gamma ray emitting radionuclide with concentration f = 0.5….

Give the mean and the variance of the reconstructed image, mean[ˆ f(x, y)] and var[ˆ f(x, y)].

Ignoring the inverse square law and attenuation, an approximate reconstruction for SPECT imaging is given by where c˜() =  {||W()} and W() is a rectangular windowing filter that cuts off at = 0…..

Find the numerical responses in each to an event in crystal C(4, 6).

Suppose a PET detector comprises four square PMTs (arranged as a 2 by 2 matrix) and a single BGO crystal with slits made in such a way that it is….